HFU660UY010J replacement
1. Core Specifications
Parameter | Value |
Filtration Rating (Absolute) | 10 μm |
Cartridge Length | 60 inches (1524 mm) |
Outer Diameter (OD) | 6.0 inches (152.4 mm) |
Inner Diameter (ID) | 3.5 inches (89 mm) |
Flow Direction | Inside → Out |
Core Design | Coreless (All-Plastic Construction) |
Seal Material | EPDM |
2. Material Construction
• Filter Media: High-quality pleated polypropylene (PP) depth media, optimized for 10 μm filtration, ensuring efficient retention of fine particles and excellent chemical compatibility.
• Support/Drainage Mesh: Polypropylene mesh, providing strong structural support and efficient drainage to maintain stable flow rate even with moderate contaminant loads.
• End Caps & Handle: 10% glass-filled polypropylene (GF PP), durable, impact-resistant, and resistant to industrial chemicals and high temperatures.
• Outer Wrap: Polypropylene, protecting the pleated media from damage during installation, transportation, and operation.
• O-Ring Seal: EPDM (Ethylene Propylene Diene Monomer) rubber, ensuring a tight, leak-free seal with Pall HFU series filter housings, preventing bypass of unfiltered fluid.
3. Performance Data
Performance Parameter | Value |
Effective Filtration Area | 17.7 m² |
Nominal Maximum Flow Rate (23°C, Clean Water) | 1890 L/min (500 gpm) |
Maximum Operating Temperature (Aqueous Systems) | 82°C (180°F) |
Maximum Differential Pressure (at 82°C) | 3.4 bar (50 psid) |
Typical Change-Out Pressure Drop | 2.0–2.5 bar (29–36 psid) |
Dirt-Holding Capacity | ≥ 190 g (tested with ISO 12103-1 A2 fine test dust) |
4. Operating Conditions
Operating Parameter | Value |
Maximum Operating Pressure | 10.3 bar (150 psig) |
Operating Temperature Range (Aqueous) | 4°C – 82°C (39°F – 180°F) |
Operating pH Range | 1 – 14 (compatible with most industrial fluids) |
Recommended Flow Velocity | 0.13 – 0.33 m/s |
Service Life | Dependent on feed water quality; typically 2–6 weeks in large-flow industrial pre-filtration applications |
5. Pressure Drop on Flow Rate
Note: Data measured at 23°C (73°F) with clean water, for reference only. Pressure drop increases as the filter accumulates contaminants.
Flow Rate (L/min / gpm) | Pressure Drop (bar / psid) |
473 / 125 | 0.14 / 2.03 |
946 / 250 | 0.28 / 4.06 |
1419 / 375 | 0.55 / 7.98 |
1890 / 500 | 0.83 / 12.03 |
6. Key Features
• Direct Drop-In Replacement: 100% compatible with Pall HFU660UY010J, no modifications to existing Pall filter housings required, ensuring seamless installation.
• High Dirt-Holding Capacity: Pleated polypropylene media design maximizes filtration area, capturing more fine particles and extending service life, reducing replacement frequency.
• Coreless Design: Reduces disposal waste and weight, while maintaining strong structural integrity during high-flow operation and installation.
• Excellent Chemical Compatibility: Resistant to most industrial fluids, water, and chemicals, suitable for diverse large-flow industrial pre-filtration applications.
• Cost-Effective: Delivers performance equal to the original Pall cartridge at a fraction of the cost, significantly reducing operational and maintenance expenses.
• Leak-Free Seal: EPDM O-ring ensures a tight, reliable seal, preventing bypass of unfiltered fluid and maintaining consistent filtration efficiency.
• Easy Installation & Replacement: Lightweight design and standard dimensions make installation, inspection, and replacement quick and simple, saving labor costs.
• Ultra-High Flow Capacity: 60-inch large format design supports large-flow industrial systems, meeting high-volume filtration demands.
7. Typical Applications
• Raw water pre-treatment (municipal, industrial, and well water sources with large flow requirements)
• Industrial cooling water pre-filtration (removing fine particles to protect heat exchangers in large-scale systems)
• Process water pre-filtration (chemical, electronics, and manufacturing industries with high-flow needs requiring fine filtration)
• Wastewater pre-filtration (removing suspended solids before advanced treatment in large wastewater treatment plants)
• RO system pre-filtration (protecting RO membranes from clogging in large-scale water treatment systems with higher filtration requirements)
• Power plant condensate pre-filtration (fine filtration before fine polishing in large power generation facilities)
• Food and beverage water pre-filtration (preliminary fine filtration to remove impurities in large-scale production lines)
8. Regulatory Compliance
• Food Contact Compliance: Conforms to FDA 21 CFR Part 177.1520 for polypropylene materials, safe for food and beverage pre-filtration applications.
• Pharmaceutical Compliance: Manufactured in accordance with cGMP (Current Good Manufacturing Practices) standards, suitable for pharmaceutical pre-filtration systems.
• Material Safety: All materials are non-toxic, non-leaching, and meet international safety standards for industrial and potable water applications.
• RoHS Compliance: Complies with EU RoHS Directive (2011/65/EU) and subsequent amendments, restricting hazardous substances.
• REACH Compliance: Meets EU REACH Regulation (EC) No. 1907/2006, ensuring the safety of all substances used in the product.
MemKway MK-HFU660UY010J is a direct, drop-in replacement for Pall Ultipleat HFU660UY010J high flow filter cartridge. It is engineered to match the original’s dimensions, performance, and compatibility, requiring no modifications to Pall HFU series filter housings. This cost-effective alternative delivers reliable 10 μm filtration, high dirt-holding capacity, and long service life, ideal for large-flow industrial raw water pre-treatment, process water pre-filtration and RO pre-filtration applications.
