HFU660UY100J replacement
1. Core Specifications
Parameter | Value |
Filtration Rating (Absolute) | 100 μm |
Cartridge Length | 60 inches (1524 mm) |
Outer Diameter (OD) | 6.0 inches (152.4 mm) |
Inner Diameter (ID) | 3.5 inches (89 mm) |
Flow Direction | Inside → Out |
Core Design | Coreless (All-Plastic Construction) |
Seal Material | EPDM |
2. Material Construction
• Filter Media: High-quality pleated polypropylene (PP) media, optimized for coarse pre-filtration, ensuring efficient retention of large particles and debris while maintaining ultra-high flow rate.
• Support/Drainage Mesh: Polypropylene mesh, providing strong structural support and efficient drainage to maintain stable flow rate even with heavy contaminant loads.
• End Caps & Handle: 10% glass-filled polypropylene (GF PP), durable, impact-resistant, and resistant to industrial chemicals and high temperatures.
• Outer Wrap: Polypropylene, protecting the pleated media from damage during installation, transportation, and operation.
• O-Ring Seal: EPDM (Ethylene Propylene Diene Monomer) rubber, ensuring a tight, leak-free seal with Pall HFU series filter housings, preventing bypass of unfiltered fluid.
3. Performance Data
Performance Parameter | Value |
Effective Filtration Area | 17.7 m² |
Nominal Maximum Flow Rate (23°C, Clean Water) | 1890 L/min (500 gpm) |
Maximum Operating Temperature (Aqueous Systems) | 82°C (180°F) |
Maximum Differential Pressure (at 82°C) | 3.4 bar (50 psid) |
Typical Change-Out Pressure Drop | 2.0–2.5 bar (29–36 psid) |
Dirt-Holding Capacity | ≥ 220 g (tested with ISO 12103-1 A2 fine test dust) |
4. Operating Conditions
Operating Parameter | Value |
Maximum Operating Pressure | 10.3 bar (150 psig) |
Operating Temperature Range (Aqueous) | 4°C – 82°C (39°F – 180°F) |
Operating pH Range | 1 – 14 (compatible with most industrial fluids) |
Recommended Flow Velocity | 0.15 – 0.35 m/s |
Service Life | Dependent on feed water quality; typically 3–8 weeks in heavy-duty industrial pre-filtration applications |
5. Pressure Drop on Flow Rate
Note: Data measured at 23°C (73°F) with clean water, for reference only. Pressure drop increases as the filter accumulates contaminants.
Flow Rate (L/min / gpm) | Pressure Drop (bar / psid) |
473 / 125 | 0.14 / 2.0 |
946 / 250 | 0.28 / 4.0 |
1419 / 375 | 0.55 / 8.0 |
1890 / 500 | 0.83 / 12.0 |
6. Key Features
• Direct Drop-In Replacement: 100% compatible with Pall HFU660UY100J, no modifications to existing Pall filter housings required, ensuring seamless installation.
• Ultra-High Flow Rate: 1890 L/min (500 gpm) nominal maximum flow rate, suitable for large-scale industrial water treatment systems.
• Coarse Pre-Filtration: 100 μm absolute rating effectively captures large particles and debris, protecting downstream filters and equipment from clogging.
• High Dirt-Holding Capacity: Pleated polypropylene media design maximizes filtration area, extending service life and reducing replacement frequency.
• Coreless Design: Reduces disposal waste and weight, while maintaining strong structural integrity during high-flow operation and installation.
• Excellent Chemical Compatibility: Resistant to most industrial fluids, water, and chemicals, suitable for diverse heavy-duty industrial applications.
• Cost-Effective: Delivers performance equal to the original Pall cartridge at a fraction of the cost, significantly reducing operational and maintenance expenses.
• Leak-Free Seal: EPDM O-ring ensures a tight, reliable seal, preventing bypass of unfiltered fluid and maintaining consistent filtration efficiency.
7. Typical Applications
• Raw water pre-treatment (industrial and municipal sources)
• Cooling tower water pre-filtration
• Heavy-duty industrial pre-filtration
• Power plant water system pre-filtration
• Wastewater pre-treatment
• Large-scale process water pre-filtration
• Irrigation water pre-filtration
8. Regulatory Compliance
• Food Contact Compliance: Conforms to FDA 21 CFR Part 177.1520 for polypropylene materials, safe for food and beverage applications.
• Pharmaceutical Compliance: Manufactured in accordance with cGMP (Current Good Manufacturing Practices) standards, suitable for pharmaceutical water systems.
• Material Safety: All materials are non-toxic, non-leaching, and meet international safety standards for industrial and potable water applications.
• RoHS Compliance: Complies with EU RoHS Directive (2011/65/EU) and subsequent amendments, restricting hazardous substances.
• REACH Compliance: Meets EU REACH Regulation (EC) No. 1907/2006, ensuring the safety of all substances used in the product.
MemKway MK-HFU660UY100J is a direct, drop-in replacement for Pall Ultipleat HFU660UY100J high flow filter cartridge. It is engineered to match the original’s dimensions, performance, and compatibility, requiring no modifications to Pall HFU series filter housings. This 60-inch coarse pre-filtration cartridge delivers ultra-high flow rate, excellent dirt-holding capacity, and long service life, ideal for heavy-duty industrial pre-filtration and large-scale water treatment systems.
