HF.Zs 05-40-FSE Replacement Filter Cartridge
MemKway MK-ZS05-40FE is an independently manufactured replacement filter cartridge for Veolia / SUEZ HF.Zs 05-40-FSE (OEM part number 3146358). Designed for compatible high-flow filtration systems, it supports replacement projects in industrial water treatment and RO pretreatment applications.
5 μm Nominal | 40″ Length | 226 O-ring | EPDM
HF.Zs 05-40-FSE Compatible Replacement Overview
MemKway supplies independently manufactured replacement cartridges for selected Veolia / SUEZ High Flow Z systems, with model cross-referencing and configuration verification before quotation.
OEM Cross-Reference
Original Veolia part number 3146358.
Fit & Seal Verification
40-inch, 226 O-ring and EPDM configuration.
Project-Based Supply
Trial quantities and made-to-order supply.
HF.Zs 05-40-FSE Replacement Specifications
| Parameter | Specification / Reference |
|---|---|
| MemKway Model | MK-ZS05-40FE |
| OEM Model | Veolia / SUEZ HF.Zs 05-40-FSE |
| OEM Part Number | 3146358 |
| Filter Series | High Flow Z / HF.Zs Nominal |
| Filtration Rating | 5 µm Nominal (OEM reference) |
| Nominal Length | 40" (1016 mm) |
| Reference Outer Diameter | 6.5" (165 mm) |
| End #1 Connection | 226 Double O-ring Adapter |
| End #2 Connection | Closed End with Handle |
| Reference Seal Material | EPDM |
| Filter Media | Refer to MemKway datasheet |
| Flow Rate / Pressure Drop | Confirm with MemKway test data |
Performance Conditions
Maximum Pressure Drop:
50 psid (3.4 bar) @ 77°F (25°C)
35 psid (2.4 bar) @ 160°F (71°C)
Recommended Change-Out Pressure Drop:
35 psid (2.4 bar) @ 77°F (25°C)
Note: Actual operating performance may vary depending on flow rate, water quality, temperature, and other system conditions. Please contact MemKway for technical assistance with your specific application.
HF.Zs 05-40-FSE Cross-Reference
| Brand | Original Model | MemKway Replacement | Filtration Rating | Length | Connection |
|---|---|---|---|---|---|
Veolia / SUEZ |
HF.Zs 01-40-FSE |
MK-ZS01-40FE |
1 μm nominal |
40″ |
226 |
Veolia / SUEZ |
HF.Zs 05-40-FSE |
MK-ZS05-40FE |
5 μm nominal |
40″ |
226 |
Veolia / SUEZ |
HF.Zs 01-60-TSE |
MK-ZS01-60TE |
1 μm nominal |
60″ |
338 |
Veolia / SUEZ |
HF.Zs 05-60-TSE |
MK-ZS05-60TE |
5 μm nominal |
60″ |
338 |
Before Changing from the OEM Cartridge
Please verify the installed filter housing, adapter and sealing dimensions, end-cap configuration, operating conditions and required particulate-retention performance. Share the existing filter photo or OEM datasheet if the full model code is unavailable.
Industrial Filtration Applications
MemKway supplies independently manufactured replacement cartridges for selected Veolia / SUEZ High Flow Z systems, with model cross-referencing and configuration verification before quotation.
RO Pretreatment
Filtration ahead of RO membrane systems.
Desalination
Pretreatment for seawater and brackish water.
Industrial Process Water
Industrial liquid filtration applications.
Produced Water
Particulate removal where media is compatible.
Power Generation
High-flow process water pretreatment.
Chemical Processing
Liquid filtration subject to compatibility checks.
Quality & Regulatory Compliance
MemKway high flow filters are manufactured under a quality management system that has been certified to meet ISO 9001 standards. Each filter is assigned a lot code to ensure traceability of the data and materials used in the manufacturing process.
HF.Zs 05-40-FSE Replacement — Frequently Asked Questions
1. What cartridge does MK-ZS05-40FE replace?
MK-ZS05-40FE is MemKway’s replacement reference for Veolia / SUEZ HF.Zs 05-40-FSE, OEM part number 3146358. Final compatibility should be confirmed against the installed filter housing and application requirements.
2. Is HF.Zs 05-40-FSE replacement filter rated at 5 micron nominal or absolute?
The MemKway HF.Zs 05-40-FSE replacement filter is rated at 5 μm nominal. Nominal and absolute filtration ratings are not interchangeable, and replacement performance should be evaluated according to the required filtration efficiency.
3. What are the reference connection and seal specifications?
The OEM configuration uses a 226 double O-ring adapter, closed end with handle and EPDM seals.
4. What is the difference between HF.Zs 01-40-FSE and HF.Zs 05-40-FSE?
Both original models use a 40-inch cartridge configuration with a 226 O-ring adapter and EPDM seals. The main difference is the nominal micron rating: HF.Zs 01-40-FSE is 1 μm nominal, while HF.Zs 05-40-FSE is 5 μm nominal.
5. What information is needed for a quotation?
Please provide the OEM part number, required quantity, application and destination country.
Related High Flow Z Replacement Cartridges
Explore compatible replacement options for other Veolia High Flow Z configurations.
Need an HF.Zs 05-40-FSE Replacement?
Tell us your required quantity and application. Our team will review your requirements and prepare a quotation.
Trademark Disclaimer: Veolia, SUEZ, High Flow Z, and Z.Plex are trademarks or product names of their respective owners. MemKway is an independent manufacturer and supplier of compatible replacement filter cartridges and is not affiliated with, authorized by, or endorsed by Veolia or SUEZ. All original brand names and part numbers are used solely for product identification and cross-reference purposes.